ASRC dual-soundcard

[feathers]

I managed to snarf a second soundcard from my friend and have it installed and tonight I tried out ASRC on a headset/speaker split config. Pretty sweet! I had myself in my headset (naturally) and was monitoring Keith over the speaker set... The physical split between the two sources does make it a lot easier to differentiate and block them out. Highly recommended for all, if you can scrounge up a second soundcard.

Now, if my connection only supported more than one RW audio stream at a time... ^_^

[Ronald]

If you don't mind, can you elaborate on how you split the audio to the two soundcards? I set my headset to soundcard 'A', and the speaker to soundcard 'B', but everything still comes out of soundcard 'A'. :(

[Marc Sykes 852946]

Click "MAN VOICE ROUTE" in the VSCS and then click the button of the voice channel that you want to send to the speakers. It should now say SPEAK on that VSCS button instead of HDSET. You can toggle multiple channels back and forth using MAN VOICE ROUTE. It can also be helpful if you have to go into another room for a second, just put it on speaker mode for a moment.

[Ronald]

Thanks Marc, works now :)